title
  • Gyroscope for measuring angular rates, and integrated angle
  • The R1070 is a high performance yet low cost gyroscope. The R1070 features extremely low bias drift, excellent linearity in the scale factor, and fast start-up time. The R1070 wide bandwidth and dynamic range specifications are highly desirable for robot applications that require accurate orientation (heading) estimation.
Bias error: 10˚/h
Scale factor error: 0.5%
Initial time: < 1sec
  • Gyroscope for measuring angular rates, integrated angle, and linear accelerations
  • The R1370 includes all the benefits of the R1070, but in addition includes a three-axis accelerometer. The additional sensor makes this device suitable for robotic applications that require measuring impact, sudden motion changes or tilt during steady state. This device is currently been used by major cleaning robot companies.
Gyroscope
Bias error: 10˚/h
Scale factor error: 0.5%
Initial time: < 1sec

Accelerometer
Measurement range: ±2G, ±4G, ±8G
Sensitivity: 1mg/digit (±2G setting)
  • Gyroscope evaluation kit
  • The XG1010 is a gyroscope evaluation kit that can be used as a stand-alone sensor. This device provides communication interfaces that facilitate its use with PCs. The XG1010 includes a monitoring program that allows testing the different sensor settings and operational modes. The XG1010 includes USB communication interfaces.
Bias error: 10˚/h
Scale factor error: 0.5%
Initial time: < 1sec
Digital output (USB)
  • Gyroscope and accelerometers for the LEGO® MINDSTORMS® NXT
  • The XG1350 is a gyroscope and three-axis accelerometer evaluation kit that can be used as a stand-alone sensor. The XG1350 provides communication interfaces that facilitate its use with PCs. The XG1350 includes a monitoring program that allows testing the different sensor settings and operational modes. The XG1350 includes USB communication interfaces.
Gyroscope
Bias error: 10˚/h
Scale factor error: 0.5%
Initial time: < 1sec

Accelerometer
Measurement range: ±2G, ±4G, ±8G
Sensitivity: 1mg/digit (±2G setting)
Digital output (USB)
  • Gyroscope and accelerometers for the LEGO® MINDSTORMS® NXT
  • XG1300L is a device for measuring angular rates, integrated angle, and linear accelerations. The XG1300L is compatible with the LEGO NXT and EV3 communication interface and can be attached using standard LEGO Technic pins and cables. This sensor can be used in a wide range of applications, from exploring basic inertial sensing concepts up to advanced navigation applications. The XG1300L is small and light, and the electronics is protected with a solid enclosure designed to minimize external damage and facilitate handling.
Gyroscope
Bias error: 10˚/h
Scale factor error: 0.5%
Initial time: < 1sec

Accelerometer
Measurement range: ±2G
Sensitivity: 1 mg/digit (±2G setting)
  • Six-degrees-of-freedom (6DOF) Attitude Heading Reference System (AHRS)
  • The XA3300 is a small attitude heading reference system. It includes a full IMU as well as a three-axis magnetometer. The XA3300 uses an adaptive filter to provide stabilized attitude information under any dynamic operational conditions. The outputs are internally compensated for temperature changes, resulting in very low errors caused by bias drift.The XA3300 includes a monitoring program that allows testing the different sensor settings and operational modes. The XA3300 can be used in robot and motion sensing applications. The XA3300 has USB communication interfaces.
Roll, Pitch: static error < 0.5 ˚
dynamic error < 2 ˚
Heading error: < 1 ˚
Digital output (USB)
※This site and products are not connected to or endorsed by The LEGO Group. LEGO, MINDSTORMS, NXT are trademarks of The LEGO Group.